Health, Safety and Environmental Instruments and Meters
We Accept
Select Your Currency

GA606 Vibration Calibrator

01GA606

Prices are exclusive of VAT

£2,625.00
GA606 Vibration Calibrator

The GA606 is a small, self-contained handheld shaker designed for quick and easy checking of accelerometers, vibration monitoring systems and recording systems. Providing a known and controlled selectable RMS or Peak vibration for verification of accelerometers weighing up to 210g.

Features:

  • Switchable 1g RMS or 1g Peak Acceleration output
  • Drives vibration sensors up to 210g
  • Operates at 159.2 Hz
  • Battery powered and adaptable to AC
  • CE compliant


Provides 80 to 1600 calibration cycles, depending on accelerometer weight and is powered by a self contained battery pack. The automatic shut off after a 1.75 minute cycle can be overridden by a switch to provide continuous operation when required. Internal suspension is protected from overload by mechanical stops.
Performance:
Operating Frequency: 159.2Hz ±1%
Acceleration Output: 1.00g rms / 9.81ms-2 rms ±3%
Velocity Output: 9.81mms-1 rms
Displacement Output: 9.81 µs rms
Transverse Output: <3%
Distortion: 0-100g load - <2%, 100-210g load - <3%
Maximum Load: 7.4oz / 210g
Automatic Shut Off Time: 1.0-2.5 minutes

Calibration Cycles:
2g Load: 320 cycles
25g Load: 600 cycles
50g Load: 1600 cycles
100g Load: 400 cycles
150g Load: 160 cycles
210g Load: 80 cycles

Environmental
Temperature Range: +15 to +130°F / -10 to +55°C

Electrical
Ramp-Up Time: <3 sec
Internal Battery: AA x4
DC Power: 10VDC, 2.4A
Battery Life: 2g load 8 hours, 100g Load 10 hours, 210g Load 2 hours

Physical
Size (Diameter x Height): 2.2in x 7.8in / 56mm x 200mm
Weight (with batteries): 31oz / 900g
Mounting Thread: 10-32 Female
Mounting Torque (maximum): 10in-lb / 112 N-cm