Additional Information
| Brand | SKC |
|---|
The small, light-weight, smart and software driven pump designed to fulfil the requirements of low flow sampling for gases and vapours.
The new Pocket Pump is an advanced low flow sample pump combining light-weight and compact design with computer-compatible circuitry. When used with sampling media such as sorbent sample tubes, the Pocket Pump is efficient and accurate for performing TWA, STEL and Ceiling sampling for organic gases and vapours.
The Pocket Pump can be set up manually using the simple 3 button keypad or via a PC with the DataTrac software allowing startup and shutdown times to be programmed. The easy to read LCD provides information on flow, volume, temperature, time, battery status and flow faults.
The Pocket Pump is available in a number of different variations depending on your requirements:
Basic Kits include Carry Case, Battery Charger, Non-Adjustable Tube Holder, Tool Kit, Instruction Manual and Step-By-Step Guide.
Please Note. A Filter Medium will also be required. Due to the large number of filter mediums available we will contact you to find out your specific requirements. Paper and Sorbent filter mediums are all priced separately.
The new Pocket Pump is an advanced low flow sample pump combining light-weight and compact design with computer-compatible circuitry. When used with sampling media such as sorbent sample tubes, the Pocket Pump is efficient and accurate for performing TWA, STEL and Ceiling sampling for organic gases and vapours.
The Pocket Pump can be set up manually using the simple 3 button keypad or via a PC with the DataTrac software allowing startup and shutdown times to be programmed. The easy to read LCD provides information on flow, volume, temperature, time, battery status and flow faults.
- Electronic flow control with simple 3 button key pad
- Flow compensated to 5% with a flow range of 20-225 mls/min
- Programmable with the keypad or DataTrac software
- Auto shutdown with flow faults
- Impact resistant case withstands rough handling in the workplace
- Intrinsically safe model is ATEX approved
- Extended run time with NiMH battery, samples over 12 hours with one battery charge
- Two operating modes for Constant Flow (single tube) and Constant Pressure (double tube)
- Large easy to read LCD for reading sampling parameters and battery and fault status, all at the touch of a button.
- Ultra-quit operation for a greater work experience
- Compact and lightweight so easily fits into a shirt pocket or clips onto a belt without protruding
- Constant flows from 20 to 225 ml/min which accommodates most flow rates for sorbent tubes and long-duration detector tubes
- Continuous run capability with AC adaptor, useful for environmental monitoring or around-the-clock sampling without harm to the battery pack.
The Pocket Pump is available in a number of different variations depending on your requirements:
- Pocket Pump (No Kit)
- Pocket Pump Single Pump Vapour Kit
- Pocket Pump Five Pump Vapour Kit
- Pocket Pump ATEX Approved (No Kit)
- Pocket Pump ATEX Approved Single Pump Vapour Kit
- Pocket Pump ATEX Approved Five Pump Vapour Kit
- Pocket Pump Twin Port ATEX Approved (No Kit)
- Pocket Pump Twin Port ATEX Approved Single Pump Vapour Kit
- Pocket Pump Twin Port ATEX Approved Five Pump Vapour Kit
Basic Kits include Carry Case, Battery Charger, Non-Adjustable Tube Holder, Tool Kit, Instruction Manual and Step-By-Step Guide.
Please Note. A Filter Medium will also be required. Due to the large number of filter mediums available we will contact you to find out your specific requirements. Paper and Sorbent filter mediums are all priced separately.
Function : Air sampling pump
Type : Pocket Pump
Accuracy : 20 to 225 ml/min ±5%
Display : Liquid crystal display
Power supply : Built in re-chargeable nickel metal hydride
Battery 2.4 V x 1Ah
Battery life : 12 hours at 200 ml/min, 10 inches water back pressure. Indefinite when connected to charger
Operating temperature range : 20 to 110°F (-7 to 43°C)
Storage temperature Range : -40 to 113°F (-40 to 45°C)
Dimensions : 100 x 55 x 31 mm
Weight : 142g
Type : Pocket Pump
Accuracy : 20 to 225 ml/min ±5%
Display : Liquid crystal display
Power supply : Built in re-chargeable nickel metal hydride
Battery 2.4 V x 1Ah
Battery life : 12 hours at 200 ml/min, 10 inches water back pressure. Indefinite when connected to charger
Operating temperature range : 20 to 110°F (-7 to 43°C)
Storage temperature Range : -40 to 113°F (-40 to 45°C)
Dimensions : 100 x 55 x 31 mm
Weight : 142g
