Designed as an entry level vibration meter with thermometer, the HS-630 is a comprehensive vibration and temperature monitoring instrument for maintenance engineers.
With its compact size and ease of use the Vibration and Temperature Meter allows engineers to monitor vibration and temperature on any important machinery.
The kit comes with two options. One is the combined vibration meter with non-contact thermometer using a laser locating beam, while the other option comes without the temperature sensor.
Features
Using a hand held probe or magnetic mount the meter is microprocessor based and simple to use. The simple controls can easily be set to monitor and measure acceleration (g), velocity (mm/s), displacement (µm), bearing condition (Bg or Bv) and temperature (°C or °F).
The vibration meter conforms to ISO 10816-3 and also has a display hold function to make measurements easier and an automatic alarm check for bearing condition.
With an internal rechargeable lithium battery, the Vibration and Temperature Meter can run for 48 hours between recharging. The battery can easily be recharged via a mains charger or in-car charger, both supplied with the kit.
Kit Contains:
With its compact size and ease of use the Vibration and Temperature Meter allows engineers to monitor vibration and temperature on any important machinery.
The kit comes with two options. One is the combined vibration meter with non-contact thermometer using a laser locating beam, while the other option comes without the temperature sensor.
Features
- Portable
- Velocity and Bearing Condition
- Temperature Measurement
- Conforms to ISO 10816-3
- Re-chargeable Battery with Mains or In-Car Charger
- Sensor/Cable Fault Indicator
- Display Hold Function
- Choice of Metric or Imperial Measurement
Using a hand held probe or magnetic mount the meter is microprocessor based and simple to use. The simple controls can easily be set to monitor and measure acceleration (g), velocity (mm/s), displacement (µm), bearing condition (Bg or Bv) and temperature (°C or °F).
The vibration meter conforms to ISO 10816-3 and also has a display hold function to make measurements easier and an automatic alarm check for bearing condition.
With an internal rechargeable lithium battery, the Vibration and Temperature Meter can run for 48 hours between recharging. The battery can easily be recharged via a mains charger or in-car charger, both supplied with the kit.
Kit Contains:
- Meter Unit with fitted Lithium Battery
- Hand Held Accelerometer with TNC Connector
- 80cm Cable with TNC to BNC Connectors
- Magnetic Base
- Vibration Spike
- Mains Battery Charger
- In-Car Battery Charger
- Manual
- Carry Case
Technical Performance
Input: 100 mV/g constant current accelerometer
Accelerometer: Hand held, supplied with 0.8 M cable
Ranges:
Acceleration: 0-20g Peak
Velocity: 0-200 mm/s RMS
Displacement: 0-2000 μm pk-pk
Bearing Condition (Bg): 0-20g RMS
Bearing Condition (Bv): 0-200 mm/s RMS
Accuracy: ±5%
Frequency Range:
Acceleration: 5 Hz to 12 kHz
Velocity: 10Hz to 1 kHz
Displacement: 5 Hz to 1 kHz
Bearing Condition (BG & V): 1 kHz to 12 kHz
Automatic Alarm Check for Bearing Condition
Temperature Range: -20°C to 120°C or -5°F to +250°F
Laser Guide Red, <1 mW, lEG 60825·1 compliant
Distance Range:
For temperature measurement 0 to 2 metres
Distance/Spot Dia. Ratio 8:1
Accuracy: ±5%
Display: LCD
Hold Mode: Displays alarm status against ISO 10816-3
Electrical
Power: Lithium rechargeable battery -3.6 Volts, 1700 mA hours 48 hours continuous operation -Auto switch-off after 3 minutes
Battery Charge: 3 hrs from flat, supplied with meter, charger and car charger
Environmental
Operating Temperature Range: -10 to 50°C -Storage: -20 to 60°C
Temperature Range (Accel): -20° to 90°C
Hand Held Meter Sealing IP54
Mechanical
Case Material: Plastic
Dimensions Meter: 115 x 70 x 25 mm
Weight:
Meter: 160 gms,
Accelerometer (incl cable): 200 gms
Magnetic Base: 22 kg pull strength
Spike: 70mm
Input: 100 mV/g constant current accelerometer
Accelerometer: Hand held, supplied with 0.8 M cable
Ranges:
Acceleration: 0-20g Peak
Velocity: 0-200 mm/s RMS
Displacement: 0-2000 μm pk-pk
Bearing Condition (Bg): 0-20g RMS
Bearing Condition (Bv): 0-200 mm/s RMS
Accuracy: ±5%
Frequency Range:
Acceleration: 5 Hz to 12 kHz
Velocity: 10Hz to 1 kHz
Displacement: 5 Hz to 1 kHz
Bearing Condition (BG & V): 1 kHz to 12 kHz
Automatic Alarm Check for Bearing Condition
Temperature Range: -20°C to 120°C or -5°F to +250°F
Laser Guide Red, <1 mW, lEG 60825·1 compliant
Distance Range:
For temperature measurement 0 to 2 metres
Distance/Spot Dia. Ratio 8:1
Accuracy: ±5%
Display: LCD
Hold Mode: Displays alarm status against ISO 10816-3
Electrical
Power: Lithium rechargeable battery -3.6 Volts, 1700 mA hours 48 hours continuous operation -Auto switch-off after 3 minutes
Battery Charge: 3 hrs from flat, supplied with meter, charger and car charger
Environmental
Operating Temperature Range: -10 to 50°C -Storage: -20 to 60°C
Temperature Range (Accel): -20° to 90°C
Hand Held Meter Sealing IP54
Mechanical
Case Material: Plastic
Dimensions Meter: 115 x 70 x 25 mm
Weight:
Meter: 160 gms,
Accelerometer (incl cable): 200 gms
Magnetic Base: 22 kg pull strength
Spike: 70mm
Datasheets
HS-620 Vibration Meter
HS-630 Vibration and Temperature Meter
Manuals
HS-620 Vibration Meter
